13
art.nr
.bruk-S3-eng, Rev
. 2016-02
Panthera
AB reserves the right to make technical changes if required
SETTINGS
Adjusting the high brake
(Fig. 14)
High brake are activated by pushing lever (1) forward until stop. The the rear wheel ar
locked. Repeat on the other side.
1) Use a 5 mm Allen key in order to loosen the lock screw (1).
2) You will now be able to push the brake forwards and backwards. Adjust the brake so
that it presses around 4 mm into the tyre while in locked position. Tighten the lock screw
(1) using a 5 mm Allen key.
3) Adjust the brake on the other side by following steps 1 to 3.
ACCESSORIES
Anti-tip devices
(Fig. 15)
The two anti-tip devices are
extremely important accessories
which must be
folded out
in
order
provide adequate protection against
the user tipping backwards
.
Folding out the anti-tip devices
:
1. Push the handle downwards (1).
2. Fold out the anti-tip device.
3. Adjust the ground clearance (3) by fixing the wheel tubing in any of the four positions.
4. Fold out the anti-tip device on the other side by following steps 1 to 3.
Folding in the anti-tip devices
:
1. Push the handle downwards (1).
2. Fold the anti-tip device under the seat.
Side guards
(Fig. 16)
The side guards prevent clothing and loose items from becoming jammed in the wheel-
chair’s spokes and also stop dirt from the wheels getting onto the user’s clothing.
The side guards are fitted with a soft upper section that folds down upon load, for exam
-
ple, when the user transfers to and from the wheelchair. You can place your hands on the
side guards while pulling yourself up and down.
The side guards can be removed, during transportation, for example, by pulling them up
vertically to release them from their attachments.
Fig. 15
Fig. 16
