9
Panthera
AB reserves the right to make technical changes.
art.nr.bruks-barn-eng Rev. 2013-03
ADJUSTMENTS
3) Backrest
Bambino
(Figures 10, 11 and 12)
Backrest height
(Figure 10)
First loosen the bolts on both sides; see Figure 9. Next release the backrest upholstery
from the tensioning straps. You can now adjust the backrest to a suitable height by moving
the backrest columns upwards or downwards. Once you have found a suitable height, re-
tighten the bolts. Remove the unattached strap if the backrest is adjusted to a low position.
Backrest angle
(Figures 11 and 12)
1)
Release the backrest locking function by pulling the cable (4) – see Figure 10 – and
folding the backrest forwards.
2)
Loosen the lock nuts (2) with a 13-mm spanner, and screw in the adjustment screws (3)
using a 5-mm Allen key.
3)
Loosen the bolts (5) and (6) – see Figure 11 – with a 10-mm spanner.
4)
Fold back the backrest so that the locking pin (7) springs out.
5)
Adjust the desired angle by moving the entire backrest forwards or backwards.
6)
Tighten the bolts (5) and (6) with a 10-mm spanner.
7)
Use the adjustment screws (3) to eliminate play using a 5-mm Allen key so that both
of the adjustment screws are even with the frame. Tighten the lock nuts (2) with a 13-mm
spanner.
8)
Check that the locking pins spring out in their locking slots when the backrest is folded
back.
Figure 11
Figure 12
Figure 10
