13
Panthera
AB reserves the right to make technical changes.
art.nr.bruks-barn-eng Rev. 2013-03
ADJUSTMENTS
4) Positioning of the brakes
Bambino
(Figure 17)
The brakes must be adjusted so that in the locked position, they press about 3-4 mm into
the tyres. Adjust by loosening the brake clamping bolt with a 10-mm spanner and a 4-mm
Allen key, after which you can move the brakes forwards or backwards along the frame's
seat tubes. Try different positions until the brakes are correctly adjusted and then retighten
the clamping bolt. NB: The braking force will change if the air pressure is too low, the tyres
worn or when changing to another tyre type. You should therefore regularly check the
position of the brakes.
4) Anti-tip device
Bambino
(
Figure 18
)
With the anti-tip device lowered, adjust the ground clearance by placing the wheel tube in
one of the four positions shown in Figure 18. The anti-tip device can be folded away under
the frame when not needed. Do this be pressing down the anti-tip device and then turning
it under the seat. When you later fold out the anti-tip device, make sure that it is secured
in the locking slots. When the child is learning back wheel manoeuvring, the anti-tip device
should be set at a height that permits the chair to be balanced.
Figure 17
Figure 18
