panthera Bambino Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 20

panthera Bambino Скачать руководство пользователя страница 8

8

art.nr.bruks-barn-eng Rev. 2013-03

Panthera

AB reserves the right to make technical changes.

ADJUSTMENTS

1) Seat upholstery tension

Micro

Bambino

(Figures 6 and 7)

The tension of the rear half of the seat upholstery can be adjusted by tightening or relea-
sing the Velcro strap at the bottom of the seat; Figures 5 and 6. This enables you to vary
the seat height by about 2 cm, upwards or downwards.

2) Foot plate

Micro

(Figure 8)

Vertically

: You can adjust the foot plate upwards or downwards by changing holes on the

bracket. Remove the screws that secure the foot plate. You can now move the foot plate
upwards or downwards to one of the vertical positions. The foot plate must be at a height
that provides support for the undersides of the thighs against the seat at the same time as
the feet are supported by the foot plate.

Horizontally:

The foot plate can be turned so that the plate is backwards or forwards.

Remove the two screws that secure the foot plate. Turn the plate and retighten the screws.

Foot plate

Bambino

(Figure 9)

Vertically

: Loosen the screws (1) – see Figure 8 – and adjust the plate upwards or

downwards. Tighten the screws again. If the feet need to be further down, you can turn the
bracket for the foot plate so that it is straight down.

Horizontally:

Loosen the screws (2)

and fully open the hinge clamp, and then carefully lift the foot plate forwards or backwards.

Angle

: Before you tighten the screws (2), set the desired angle. Fully tighten the screws

.

Figure 6

Figure 7

Figure 8

Figure 9

«
...
6
7
8
9
10
...
»

Содержание Bambino





















Отзывы:

Нет отзывов