8 | Motorized Screen Set-Up Guide
SETTING THE DOWN LIMIT POSITION
To reduce the screen drop:
Make sure middle fastening screw (F) is loosened, then loosen small right
fastening screw (FR), Turn right screw ( RS ) counterclockwise to decrease
the amount of screen drop. Run the screen down to test the stop position. If
the screen drops too far, adjust the limit switch again. Repeat until the desired
position is set. When completed, fasten the middle fastening screw (F) and
small right fastening screw (FR).
To increase the screen drop:
Make sure middle fastening screw (F) is loosened, then loosen the small right
fastening screw (FR). Turn the right screw (RS) clockwise to increase the
amount of screen drop. Run the screen down to test the stop position. If the
screen does not drop enough, adjust the limit switch again. Repeat until the
desired position is set. When completed, fasten the middle fastening screw
(F) and small right fastening screw (FR).
