6 | Motorized Screen Set-Up Guide
OPERATING INSTRUCTION:
Remove two pulling locks on the bottom bar first before any operation. this is
important to prevent motor damage.
Plug in power supply.
For Switch control: Plug in Switch into switch jack. Press button to Up
position, screen goes up. Press button to stop position, screen stops. Press
button to down position, screen goes down.
For IR Remote: Direct the handset to IR window on screen housing. Press
the Up/Stop/Down button on the hand set, screen goes Up/Stop/Down
accordingly.
For 1V trigger: Input 1V trigger signal, screen goes down. Stop this signal,
screen goes up.
Electric lock: Press the Up & Down buttons on the IR handset together, then
all Up & Down buttons on the switch and IR handset will be locked. To be
unlocked press
Stop button on the IR handset again or unplug the power supply and plug in
again.
Keep the screen rolled in its protective case when not in use. Always examine
both front and back of surface before re-rolling into case to make certain
screen is free of dust, dirt or other foreign matter.
