PanoSpace I, Руководство пользователя

Страница: 30 / 36

28
Heat up / Cool down the print head: Toggle button to heat up / cool down
the print head.
3.11 Print 3D Models on SD Card
Go to the “Adjust” page and click the “SD card” button. A list of ZSP files on the
micro SD card are displayed on the window. Select one file and click the “Print”
button to print.
3.12 Calibrate Printer
If the printed model looks skewed on the same layer, calibration is needed.
1. Go to the “Adjust” page and click the “Calibrate” button.
2. Click the “Print” button to print out the calibration model.
3. Measure the length of L13 and L24 and fill out the blanks on the window.
4. Click the “Calibrate” button.
3.13 Stop Printer
This is used to stop operations during adjustments.
Go to the “Adjust” page and click the “Emergency stop” button.