PanoSpace I, Руководство пользователя

Страница: 28 / 36

26
Auto Placement: Place all the models in the print volume automatically. This is
useful to separate overlapping models.
Change view:
Change views to look at models from different angles.
3.6 Load Filament
It is similar to the operations on the touch screen:
1. Insert the filament into the hole on top of the extruder.
2. Go to the “Adjust” page and click the “Load filament” button.
3. After the print head is at the right temperature, it extrudes the filament
automatically.
4. Click the “Finish” button after filament comes out from the print head.
3.7 Unload Filament
It is similar to the operations on the touch screen:
1. Go to the “Adjust” page and click the “Unload filament” button.
2. After the extruder reaches proper temperature, it retracts the filament
automatically.
3. Take out the filament roll and click the “Finish” button.
3.8 Adjust Level of Print Bed
Go to the “Adjust” page and click the “Adjust print bed leveling” button. It is