PanoSpace I, Руководство пользователя

Страница: 25 / 36

23
To improve the print quality, change the slicing configuration before printing.
Click “Change slicing configuration” button to open the following window.
Strength:
Change infill density. The stronger, the longer the print time.
Speed:
Change print speed. This will affect your print quality.
Support: Generate support structure for overhanging parts. It helps to increase
the print success rate for objects that have overhanging parts.
Raft: Generate a base for the actual object. It helps to increase the print
success rate.
Temperature: Set up print temperature.
Note: PanoSpace PLA filament has been developed through extensive, long-term testing. At room temperature
and dry conditions, the ideal print temperature is approximately 220 degrees C (428 degrees F). The use of
filament from other manufacturers may result in inferior print quality or difficulties removing the raft.
Tips: Initially, print with the recommended print temperature on the filament roll. If those settings do not produce
the desired result,we recommend experimenting by changing the temperature setting up or down. The rule of
thumb is: higher temperature makes the printed object stronger, but harder to remove raft and support; lower
temperature makes the printed object weaker and the extruder harder to extrude filament.