Panoscan MARK TWO Скачать руководство пользователя страница 2

Страница: 2 / 37

IMPORTANT ADDENDUM

This manual was written before the OS-X version 6.0.3 was released. Most of the features and

operation are identical in OS-X. There are a few things that you will need to be aware of when

using OS-X with this system.

Using the Firewire Converter with OS-X

The drivers for the Firewire converter are built into OS-X 10.2 or newer. There is no need to install

any additional drivers to use the camera system or converter. However there is an issue with the

OS-X and its ability to mount the camera. It is very important that you follow these steps exactly in

the correct order for the camera to mount on the system and work.

1. Before proceeding with connections power up the computer so it can be booting while you set

up the rest of the system.

2. Connect the converter SCSI connection to the processor module.

DO NOT CONNECT THE

FIREWIRE YET.

3. Power up the processor module and verify that the green light on the converter is lighted.

4. Assuming the computer is now running, plug in the Firewire converter connection to the

computer. You will see the converter’s green light blink off for a moment. The red activity light on

the Processor will light up for several seconds. Wait for the red activity light on the Processor

module to go off.

5. Now unplug the Firewire connection. Wait at least 5 seconds and then restore the Firewire

connection. Wait another 10 seconds.

6. Start up the ViewFinder Software and you should now see that the camera is now ready to use.

Failure to follow these steps in order may cause the software to not recognize the camera is

connected. If you have trouble unplug the Firewire connection. Turn off the processor and repeat

steps 1 – 6.

Содержание MARK TWO






































Результаты поиска

Содержание MARK TWO

Отзывы:

Бренды по названию

Популярные бренды

Panoscan MARK TWO, Инструкции по эксплуатации

Результаты поиска

Содержание MARK TWO

Отзывы:

Бренды по названию

Популярные бренды