Panoscan MARK TWO Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 37

background image

15

You should AVOID using the Adaptec 1480/1460 SlimSCSI PC cards. The Adaptec SlimSCSI cards

will not work reliably on any Macintosh systems.

7.

Connect the power source to the processor module. It’s a good idea to connect the battery

because it can provide backup power in the event of an accidental power failure. (ie. Kicking the

cord out of the wall.) The battery connector is keyed to insert only in one position. Examine the

connectors carefully and you will see that there is a larger key at the 12:00 position on the

connector. Line this connector up and you will feel it slip into place and the connector will not

rotate. Once the connector is lined up turn the locking ring clockwise until it stops. The connector

should now be locked in place. It is normal for the connector body to feel slightly loose in the

locked position. The pins in the connector are designed to “float” to maintain a perfect connection.

Your camera is provided with an IEC-320 power cord for USA. Use only an approved IEC-320

power cord with a plug appropriate for the power receptacles of the region. The camera has a

universal input power supply, that operates from any AC voltage between 85 and 264 volts (100 to

240 volts nominal), 47 to 63 Hz single phase, without changing switches or jumpers. The camera

consumes a maximum of about 60 watts of power, and should be operated from the same circuit

supplying power to the computer connected to the camera. When AC power is connected to the

camera the AC status indicator will glow green or red depending on the charge rate. Red indicates

the system is in the “rapid” charge mode. Green indicates “trickle” charge mode. We should

mention that it’s best to maintain the battery fully charged. It is impossible to over charge a battery

so feel free to leave it charging overnight.

8.

If you are using the camera with a computer that has a SCSI host adapter you should connect the

computer at this time.

If you are using the Firewire converter do not connect the Firewire cable

quite yet.

«
...
13
14
15
16
17
...
»

Содержание MARK TWO






































Отзывы:

Нет отзывов

Похожие инструкции для MARK TWO

Бренд: Park Play Страницы: 18

Бренд: Zell Страницы: 33

Бренд: Campbell Страницы: 70

Бренд: Yuasa Страницы: 35

Бренд: 3M Страницы: 10

Бренд: BAC Страницы: 36

Бренд: Baader Planetarium Страницы: 6

Бренд: FeiYu Tech Страницы: 14

Бренд: Padwico Страницы: 28

Бренд: Vega Страницы: 2

Бренд: Vega Страницы: 11

SmartDiag2GO GD201-O

Бренд: OCTO Страницы: 5

Бренд: Neuspeed Страницы: 2

Бренд: Berkefeld Страницы: 12

IR 2.0 12-24Vdc

Бренд: DOMUS LINE Страницы: 9

Бренд: Dometic GROUP Страницы: 20

Бренд: Ericsson Страницы: 487

Ocean Seven 304Plus

Бренд: idronaut Страницы: 79

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды