SCANNDY MANUAL
Page 5
to the left side
(Other function can be defined by SFL or API)
8
Navigation key UP
Press the up navigation key to move the cursor
up (Other function can be defined by SFL or API)
9
Navigation key
RIGHT
Press the right navigation key to move the
cursor to the right side
(Other function can be defined by SFL or API)
10
Cancel/Clear key
Press the Cancel/clear key to cancel a function
or to clear keyboard inputs
(Other function can be defined by SFL or API)
11
Trigger key
Press the Trigger key to start the barcode or
RFID reader (Other function can be defined by
SFL or API)
12
ON/OFF OK key
Default: ON/OFF button
When OFF: press the OK button short to boot the
device
When ON: press the OK button for 3 sec. to shut
the device OFF
When ON: press the OK button short to confirm
messages or inputs
(Other function can be defined by SFL or API)
13
Navigation key
DOWN
Press the down navigation key to move the
cursor down (Other function can be defined by
SFL or API)
12+13 Launcher Mode
Fall back Configuration mode
Follow the instructions below to set the device
into the launcher mode
1.
Switch Off the device
2.
Press and hold key 13 (DOWN) and key
12 (OK) until you hear a beep (this can
take several seconds)
3.
Connect the device to a PC via USB
4.
The device will be mounted as a
removable drive “SCANNDY”
