SCANNDY MANUAL
Page 18
Wi-Fi CONNECTION
For Wi-Fi enabled devices to connect to a host.
Note!
The following description is only valid for devices with factory installed
software. Devices with custom software can behave different, depending on
the programming.
1.
Connect the device to the host using the USB port. Brows the drive
“Scanndy”. and search for the file *.sfl
2.
Open the file *.sfl and make sure the output mode is set for Wi-Fi
Example for Wi-Fi output
Config {
[Uni]
Outmode=Wi-Fi
Outproto=plain
}
(See the SFL reference manual for further information)
3.
Save the settings that have been made and open the file “config.ini” to
verify the general Wi-Fi settings.
Example:
[Wi-Fi]
Host=127.0.0.1
Port=80
Dhcp=1
Ip=
Netmask=
Gateway=
Crypt=2
Ssid=ssid
Wepkey=
