SCANNDY MANUAL
Page 15
•
Bluetooth Keyboard Emulation (HID) -
The scanner connects to the host via Bluetooth and emulates a
keyboard. The scanner accepts an incoming connection requested
from a Bluetooth host.
(See the SFL reference manual for further information)
3.
Save the settings that have been made and open the file “config.ini” to
verify the general Bluetooth settings.
Example:
[BT]
Devname=SCANNDY808240
Master key=1234
Slave key=1234
Security=0
Available=0
Dirty=0
Defaddress=000000000000
Address=000000000000
SPPchannel=3
For further information please refer to the config_ini reference guide.
4.
Save the settings and disconnect the device prom the PC.
On the host PC, launch the third party Bluetooth pairing application
and place the application into discover Bluetooth device mode.
5.
Select the device with the device name configured in the file config.ini
from the discovered device list. The Bluetooth application may prompt
you to scan a passkey it generated, or for you to create and then scan
a pin.
6.
If the Bluetooth application prompts you to generate a pin, enter the
configured Bluetooth pin
DEFAULT: 1234
