5
1
Power LED.
2
SERVICE port: Firmware update port.
3
DC 24V/1A power supply input port. Note: The Matrix supports POC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the other one doesn’t need
power supply.
4
RJ45 connector for connecting the HDBT OUTPUT port of Matrix with a CAT cable.
5
▪
Illuminating: Matrix and Receiver are in good connection status.
▪
Flashing: Matrix and
Receiver are in poor connection status.
▪
Dark: Matrix and Receiver are not connected.
6
▪
Illuminating: HDMI signal with HDCP.
▪
Flashing: HDMI signal without HDCP.
▪
Dark: No HDMI
signal.
7
HDMI output port, connect to HDMI display device such as TV or monitor with HDMI cable.
8
Analog audio output port. The audio is extracted from HDMI signal.
9
Connect to IR receiver cable, the IR receive signal will emit to the
“
IR OUT
”
port of the Matrix.
10
Connect to IR blaster cable, the IR emit signal is from the
“
IR IN
”
port of the Matrix.
11
RS-232 Port
3. Matrix Switcher control
This Matrix switcher can support IR remote, RS232 / WEB GUI browser or the front push-buttons control.
Remote Control
WEB GUI browser Control
The default IP address are 192.168.1.100.
After opening the browser, users can type the matrix switcher IP address and press enter:
The default user name is
Admin
and the password is
admin
.
Power on the Matrix or set it to standby mode.
Output 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
1/2/3/4
5/6/7/8
Select the desired input source to Output 1 port output,
the corresponding green LED on the front panel
illuminates.
ALL
Select all output source simultaneously. For example,
when you press the “All” button and then press input “1”
button, at this time the input “1” source will output to all
display devices.
Содержание HD8820K
Страница 1: ...1 PANIO HD8820K User manual...