4
press the button again to wake up the device.
6
IR Window IR receiver window, it only receives the IR remote signal from this product.
7
LOCK button Press the LOCK button to lock front panel buttons (Except the power button); Press
the button again to unlock.
Back panel
1
IR IN (1/2/3/4/5/6/7/8/ALL) ports: Connect to IR receiver cable, the IR receive signal will emit to
the“IR OUT” port of the HDBaseT Receiver.
2
IR OUT (1/2/3/4/5/6/7/8/ALL) ports: Connect to IR blaster cable, the IR emit signal is from the “IR
IN” port of the HDBaseT Receiver.
3
AUDIO OUT (1-8) ports: 8 groups of coaxial and balanced analog audio mirrored output ports.
AUDIO OUT (1-8) follows the video output of OUTPUT (1-8) ports.
4
CONTROL ports: TCP/IP- The link port for TCP/IP control. Connect to an active Ethernet link with an
RJ45 cable. RS-232- Command control port. Connect to a PC or control system with a D-Sub 9-pin
cable to control the Matrix.
5
GND: Connect the housing to the ground.
6
POWER input.
7
OUTPUT (1-8) ports: HDMI output ports, connect to HDMI display device such as TV or monitor
with an HDMI cable. HDBT mirrored output ports, connect to HDBaseT Receiver via CAT cable.
8
INPUT (1-8) ports: HDMI input ports , connect to HDMI source device such as DVD or PS4 with an
HDMI cable.
HDBaseT Receiver Panel
Содержание HD8820K
Страница 1: ...1 PANIO HD8820K User manual...