3
1. Packing
2. Panel description
Front panel
1
OLED screen: Display matrix switching status, input / output port, EDID, Baud rate, IP Address.
2
Power LED: The LED will illuminate in green when the product is working normally, and red when
the product is on standby.
3
OUTPUT / INPUT buttons: You need to press an output button (1~8) firstly and then press an input
button (1~8) to select the corresponding input source for the output port.
4
MENU / ENTER/ UP /DOWN
EDID setting:
On the initial OLED display screen, press “MENU” button to enter “Select EDID”
interface, press “UP/DOWN” button to select the required EDID, and press the “ENTER” button to
enter “Copy to Input:” interface. Then press “UP/DOWN” button to select the input port you need
to set, and press “ENTER” button again to confirm.
Baud rate setting:
On the initial OLED display screen, press “MENU” button twice to enter “SELECT
BAUD” interface, and press “UP/DOWN” button to select the required Baud rate, finally press the
“ENTER” button to confirm the setting.
IP Address Check:
On the initial OLED display screen, press “MENU” button three times to enter
the IP interface and check the current IP address, then press “UP/DOWN” button to switch DHCP
ON/OFF, finally press the “ENTER” button to confirm the setting. Pressing the “MENU” button
again will return to the initial OLED display status.
5
POWER button: Press and hold the POWER button for 3 seconds to enter the standby mode, then
No.
Name
Qty Unit
No.
Name
Qty
Unit
1
HD8820K-Matrix Switcher
1
Pcs
6
5-pin Phoenix Connector
8
Pcs
2
HD8820K-R receivers
8
Pcs
7
Rack accessories
1
Kit
3
Remote Control
Battery not provided
1
Pcs
8
IR Blaster&Receiver cable
18
Pcs
4
RS-232 cables
1
Pcs
9
User manual
1
Pcs
5
3-pin Phoenix Connector
8
Pcs
10
Power Cord
1
Pcs
Содержание HD8820K
Страница 1: ...1 PANIO HD8820K User manual...