Panio HD4420K, Руководство пользователя, Страница: 5 / 12

5
1
Power LED.
2
SERVICE port: Firmware update port.
3
DC 24V/1A power supply input port. Note: The Matrix supports POC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the other one doesn’t need
power supply.
4
RJ45 connector for connecting the HDBT OUTPUT port of Matrix with a CAT cable.
5
▪
Illuminating: Matrix and Receiver are in good connection status.
▪
Flashing: Matrix and
Receiver are in poor connection status. ▪ Dark: Matrix and Receiver are not connected.
6
▪ Illuminating: HDMI signal with HDCP. ▪ Flashing: HDMI signal without HDCP. ▪ Dark: No HDMI
signal.
7
HDMI output port, connect to HDMI display device such as TV or monitor with HDMI cable.
8
Analog audio output port. The audio is extracted from HDMI signal.
9
Connect to IR receiver cable, the IR receive signal will emit to the
“
IR OUT
”
port of the Matrix.
10
Connect to IR blaster cable, the IR emit signal is from the
“
IR IN
”
port of the Matrix.
11
RS-232 Port
3. Matrix Switcher control
This Matrix switcher can support IR remote, RS232 / WEB GUI browser or the front push-buttons control.

Remote Control

WEB GUI browser Control
The default IP address are 192.168.1.100.
After opening the browser, users can type the matrix switcher IP address and press enter:
The default user name is Admin and the password is admin .
Power on the Matrix or set it to standby mode.-
No1
Output 1 / 2 / 3 / 4 -
No 2 3 4 5
1/2/3/4
Select the desired input source to Output 1 port output,
the corresponding green LED on the front panel
illuminates.
Select the last or next the desired input source to
Output 1 port output, the corresponding green LED on
the front panel illuminates.