Panio HD4420K, Руководство пользователя, Страница: 3 / 12

3
1. Packing
2. Panel description
Front panel
1
OLED screen: Display matrix switching status, input / output port, EDID, Baud rate, IP Address.
2
Power LED: The LED will illuminate in green when the product is working normally, and red when
the product is on standby.
3
OUTPUT / INPUT buttons: You need to press an output button (1~4) firstly and then press an input
button (1~4) to select the corresponding input source for the output port.
4
MENU / ENTER/ UP /DOWN
EDID setting: On the initial OLED display screen, press “MENU” button to enter “Select EDID”
interface, press “UP/DOWN” button to select the required EDID, and press the “ENTER” button to
enter “Copy to Input:” interface. Then press “UP/DOWN” button to select the input port you need
to set, and press “ENTER” button again to confirm.
Baud rate setting: On the initial OLED display screen, press “MENU” button twice to enter “SELECT
BAUD” interface, and press “UP/DOWN” button to select the required Baud rate, finally press the
“ENTER” button to confirm the setting.
IP Address Check: On the initial OLED display screen, press “MENU” button three times to enter
the IP interface and check the current IP address, then press “UP/DOWN” button to switch DHCP
ON/OFF, finally press the “ENTER” button to confirm the setting. Pressing the “MENU” button
again will return to the initial OLED display status.
No. Name Qty Unit No. Name Qty Unit
1 HD4420K-Matrix Switcher 1 Pcs 6 5-pin Phoenix Connector 4 Pcs
2 HD4420K-R receivers 4 Pcs 7 Rack accessories 1 Kit
3 Remote Control
Battery not provided
1 Pcs 8 IR Blaster&Receiver cable 10 Pcs
4 RS-232 cables 1 Pcs 9 User manual 1 Pcs
5 3-pin Phoenix Connector 4 Pcs 10 Power Cord 1 Pcs