Panio HD4420K, Руководство пользователя

Страница: 4 / 12

4
5
POWER button: Press and hold the POWER button for 3 seconds to enter the standby mode, then
press the button again to wake up the device.
6
IR Window IR receiver window, it only receives the IR remote signal from this product.
7
LOCK button Press the LOCK button to lock front panel buttons (Except the power button); Press
the button again to unlock.
Back panel
1
IR IN (1/2/3/4/ALL) ports: Connect to IR receiver cable, the IR receive signal will emit to the“IR
OUT” port of the HDBaseT Receiver.
2
IR OUT (1/2/3/4/ALL) ports: Connect to IR blaster cable, the IR emit signal is from the “IR IN” port
of the HDBaseT Receiver.
3
AUDIO OUT (1-4) ports: 4 groups of coaxial and balanced analog audio mirrored output ports.
AUDIO OUT (1-4) follows the video output of OUTPUT (1-4) ports.
4
GND: Connect the housing to the ground.
5
POWER input.
6
OUTPUT (1-4) ports: HDMI output ports, connect to HDMI display device such as TV or monitor
with an HDMI cable. HDBT mirrored output ports, connect to HDBaseT Receiver via CAT cable.
7
INPUT (1-4) ports: HDMI input ports , connect to HDMI source device such as DVD or PS4 with an
HDMI cable.
8
CONTROL ports: TCP/IP- The link port for TCP/IP control. Connect to an active Ethernet link with an
RJ45 cable. RS-232- Command control port. Connect to a PC or control system with a D-Sub 9-pin
cable to control the Matrix.
HDBaseT Receiver Panel