Panini I:Deal, Руководство оператора, Страница: 9 / 13

Operator Manual Page 8 Maintenance
4. Maintenance
The I:Deal™ has been designed as a minimal
maintenance device. As such no regular cleaning
schedule has been defined. However, processing
documents in a scanner can cause some paper dust or
other debris which after continued use could build up to
eventually lead to imaging issues. As a preventative
measure to ensure the expected quality from the device
a general maintenance program can help achieve
optimal results and avoid unnecessary failures.
CAUTION
•
Before doing maintenance, remember to
disconnect the USB and power cables from
the device.
•
Solvents or harsh cleaners may damage or
discolor the cabinetry.
•
Do not spray or try to clean the Contact
Imaging Sensors (CIS) or the inside of the
scanner with any kind of cleaner other than
what is recommended. This may damage
the CIS or the electronics.
4.1. Cleaning the Scanner
ƒ Cleaning Inside of Unit : Remove paper dust and
small debris from device by using low pressure
canned air or a dusting brush designed for use on
electronic equipment.
ƒ Cleaning Outside of Unit : The outside cabinetry
can be cleaned to remove finger marks and dust
with a damp cloth and mild soap.
4.2. Cleaning the Contact Image Sensors
1.) Gently open the front image camera
a. Manually
rotate the CIS
support,
positioning the
camera on the
bottom.
b. Open the rear CIS
support by pressing
the right tab in and
lifting up.
c. Hold the CIS support
to clean the camera
lens.
2. Remove any debris and dust. Clean the Contact
Image Sensors with a soft, lint-free cloth dampened with
Isopropyl Alcohol or with eye glass cleaner.