Panini I:Deal, Руководство оператора, Страница: 6 / 13

Operator Manual Page 5 Installation
2.4. Install Franking Roller (optional)
The optional Franking Roller is an ink stamp which can
be used to mark the front of a document to read
“ELECTRONICALLY DEPOSITED”.
Follow these steps to insert the franking roller into the
device.
Open the Franking Cover
1.) Open the top cover by pressing the top cover release
button and lifting the cover
2.) Open the franking cover by pressing forward on the
top cover latches and pulling the franking cover down
Insert the Franking Roller
1.) Insert the Franking Roller straight into the roller
harness, aligning the assembly guides on both sides
2.) Align the roller notch to fit into the positioning tab
3.) Apply pressure to the handle until the roller clicks into
place
4.). Close the franking cover by pushing it up until it
clicks into place
5.) Close the top cover. Press firmly in the middle of the
scanner to securely close the top cover.
6.) After replacing franking roller, connect device and
perform franking on a test document. Sample franking
will ensure the correct position and confirm proper
installation of the roller.
CAUTION
•
Avoid contact with the main drive roller to
prevent ink transfer to documents
•
Ink may be harmful if swallowed
•
Avoid contact with eyes
•
Damage to the unit or the roller resulting
from modifying the roller is not the
responsibility of Panini
Franking Cover
Franking Roller