Panerai LUMINOR 1950 10 DAYS GMT AUTOMATIC, Инструкция по эксплуатации

Страница: 14 / 61

25
MAINTENANCE ADVICE
Panerai watches are made to very high standards of quality. It is worth
remembering that the mechanical parts run 24 hours a day when used, so the
watch must undergo regular maintenance to ensure long life and good operation.
W
ATER
-
RESISTANCE
Have your watch checked periodically for water-resistance by an Authorized
Panerai Service Centre and restore it every two years with regular servicing, or
whenever the watch has to be opened.
The restoration of water-resistance necessarily involves replacing the seals so
as to ensure the maximum water-resistance and security.
Where the watch is used in underwater sports activities, it is recommended
that it should be checked every year before the underwater activities begin.
T
HE MOVEMENT
Have the movement of your watch checked periodically by an Authorized
Panerai Service Centre so as to preserve its perfect operation.
If the watch has a tendency to gain or lose time to a significant degree, the
movement may need to be overhauled.
The movements are designed to withstand temperature variations between
-10°C and +60°C (14°F and 140°F). Outside this range of temperatures,
operational variations exceeding those set out in the specifications of the
movement may be noticed. In addition, there is a risk that the lubricants contained
in the movement may deteriorate, resulting in damage to some of its parts.
C
LEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing your Panerai
watch with soap and warm water, using a soft brush. After this operation, and
also after bathing in the sea or a swimming pool, carefully rinse the watch with
clean water. All Panerai watches can be polished with a soft, dry cloth.
24
R
EPLACING THE STRAP
The Panerai Luminor 1950 10 Days GMT watch in steel uses a special device
for changing the strap. A pin
(A)
, visible at the side of each strap attachment,
can be released by simultaneously pushing on the push-piece
(B)
, located on
the underside of the strap attachment and on the pin itself. A special tool
(C)
,
supplied in the box, enables this operation to be carried out with simplicity and
precision. Before making the replacement, detach the two parts of the tool. To
complete the replacement, after introducing the pin, push on the push-piece
(B)
.
R
EPLACING THE BUCKLE
The screwdriver supplied with the Panerai Luminor 1950 10 Days GMT
watches enables the buckle of the strap to be replaced easily.
c
b
a