Panerai LO SCIENZIATO RADIOMIR 1940 TOURBILLON GMT ORO..., Инструкция по эксплуатации

Страница: 13 / 67

23
MAINTENANCE ADVICE
Panerai watches are produced to very high standards of quality. It is worth
remembering that the mechanical parts run 24 hours a day when used, so the
watch must undergo regular maintenance to ensure long life and good operation.
W
ATER
-
RESISTANCE
Have your watch checked periodically for water-resistance by an Authorized
Panerai Service Centre and restore it every two years with regular servicing, or
whenever the watch has to be opened.
Restoring the watch’s water-resistance necessarily involves replacing the seals so
as to ensure the maximum water-resistance and security.
Where the watch is used in underwater sports activities, it is recommended that
it should be checked every year before the season of underwater activities
begins.
T
HE MOVEMENT
Have the movement of your watch checked periodically by an Authorized Panerai
Service Centre so as to maintain its perfect operation. If the watch tends to gain
or lose time significantly, the movement may need to be overhauled.
The movements are designed to withstand temperature variations between
-10°C and +60°C (14°F and 140°F). Outside this range of temperatures,
operational variations exceeding those set out in the specifications of the
movement may be noticed. In addition, there is a risk that the lubricants
contained in the movement may deteriorate, resulting in damage to some of its
parts.
C
LEANING THE EXTERIOR
To keep the exterior in perfect condition, we recommend washing your Panerai
watch with soap and warm water, using a soft brush. After this operation, and also
after bathing in the sea or a swimming pool, carefully rinse the watch with clean
water. All Panerai watches can be cleaned with a soft, dry cloth.
22
R
EPLACING THE STRAP
The Radiomir 1940 case features a spring bar system allowing the strap to be
replaced easily.
Push on the hole visible at the side of the strap attachment to remove the strap
gently. To insert the new one, put the bar into the strap attachment and push
on the opposite side of the bar to insert it correctly into the other strap
attachment. Pay attention not to scratch the bottom of the strap attachment
during this operation.
A small groove within each strap attachment allows the operation to be carried
out easily.
WARNING: the strap and the buckle must be replaced by an Authorized
Distributor or a Panerai Service Center, in order to avoid any problems caused
by incorrect replacement. Spring bars must be replaced every time the strap
is changed.
PAA03352 libretto.qxp__ex2732 28/07/15 15:59 Pagina 22