Polar Bear East/West 10 Degree Installation Manual
9910022 Rev A
18
3.
Orient a Long Claw parallel to the long side of the module. Ensure that the module flange hems
are facing down and the support mounting tabs are facing outward. Once oriented, lower the
Long Claw until the ends rest on the short side flanges of the module (Figure 15).
Figure 15 Orient and Lower Long Claw
4.
Continue by sliding the Long Claw toward the long side flange of the module until the hems slide
past the module flange and the module mounting holes are aligned (Figure 16).
Figure 16 Lower Long Claw onto Short Side Flanges
5.
Secure the Long Claw with the hardware provided, ensuring that the bolt is inserted from the
underside of the flange and facing up (Figure 17
and Figure 18). Torque the hardware to the
module manufacturer’s specifications.
Module Flange Hems Down
Support Mounting
Tabs Out
