Polar Bear East/West 10 Degree Installation Manual
9910022 Rev A
11
Figure 7 Ballast Layout
Step 3: Attach Claws to Module
PanelClaw offers three Claw options to accommodate different frame types, Standard (Claw I), Multi-
piece (Claw III), and Long (Longitudinal). The following directions are for the Standard Claw (Claw I), for
Multi-piece and Long Claw mounting instructions please see Appendix A.
1.
Place a PV module face down on protected work surface and place a Claw over the module
frame flange on the short side of the module
Two-block configuration
Three-block configuration
Six-block configuration
Five-block configuration
Four-block configuration
One-block configuration
(Low Support)
Along North and South edges only
Two-block configuration
(Low Support)
Along East and West edges only
