Panduit VeriSafe VS2-NET, Руководство пользователя

Страница: 9 / 20

September 2022 9 VeriSafe Network Module User Guide, B21176 rev 1 [English]
ABOUT AVT
Displays firmware version, model number and universal identifier (UID) of the AVT . Use the refresh button to
update the card .
Refresh
AVT Data
ACTIVE FAULTS
This card will display active faults in the network module . The fault information is updated automatically every
3 seconds . See Troubleshooting for additional information .
21. Faults ID
Description
0 Hardware Failure . Flash code 2 during boot up
1 Power from the network module to the AVT is over the limit .
2 Indicate the network module has been reset to factory defaults
3 Data received from AVT was unable to be processed
4 Timeout while communicating with AVT
5 General SD card error
6 SD card is full
7 Time has not updated
8 Time not set
9 Web server could not load custom certificate
22. Clear Faults The Clear Faults button allows the user to clear any faults on the network
module . If the fault condition is still present the fault may be presented
after some time .