Panduit VeriSafe VS2-NET, Руководство пользователя

Страница: 2 / 20

VeriSafe Network Module User Guide, B21176 rev 1 [English] 2 September 2022
Web Application
FEATURES
The network module web application can be used to configure and monitor the AVT . Access the web
application by typing the network module IP address in a supported browser .
FIRST LOGIN
1.
Type the network module IP address (default: 192 .168 .2 .10) in a supported browser .
„
Supported browsers: Chrome, Edge, Firefox
2. On first login the user is required to change the admin password
Web App Login (factory default setting)
„
Username: admin
Password: admin
WEB APPLICATION LAYOUT
The web application layout consists of a left sidebar menu and a content area loaded with content cards .
Sidebar Menu
Card
Content Area
LOGIN
On login the user will be
directed to the AVT Status
page.
AVT STATUS PAGE
After the user has logged in they will be redirected to the AVT Status page . This page consists of two
data cards with views that will be determined by the type of AVT in use and the user settings . This page
automatically refreshes content at a static rate of once every 2 seconds .
FIGURe 1 . AVT STATUS PAGE 3-PHASE AVT (VS2-AVT-3P)
AVT STATUS PAGE FIRST CARD
Data presented in this card is updated as described in Table 5 . The user is presented with time stamps to
indicate when the data was last updated . Some data will not be shown until an absence of voltage test is