Panduit VeriSafe VS2-NET, Руководство пользователя

Страница: 3 / 20

September 2022 3 VeriSafe Network Module User Guide, B21176 rev 1 [English]
completed .
FIGURe 2
. AVT STATUS PAGE 1ST CARD VIEWS
3-Phase View DC/Single-Phase View
1.
Name User defined AVT name (Default blank) . This is used to identify data log files
and appears in the side bar menu . Changes are automatically saved .
2.
Date/Time Current Date/Time of the network module . Updated every 2 seconds .
3.
Battery Voltage and
AVT Temperature
Last measured value of the battery voltage and Internal temperature of the
AVT .
„
Updated when the user presses the test button and during the wakeup
cycle
„
Recommended to replace battery in the AVT when measured below 2 .9V .
4.
Connection Status Status of the connectivity between each pair of sensor leads based on the last
completed test performed when no voltage is present .
5.
Test Result 1 Show the most recent test result from the AVT
Test Result 1 Date Date/Time of AVT test result 1
Test Result 2 Show the test result prior to test result 1
Test Result 2 Date Date/Time of AVT test result 2
6.
AC/DC Selection
*(VS-AVT-1P Single phase (VS-AVT-1P Single phase
units only) units only)
Select appropriate power system . This will update the card view . Changes
are automatically saved .