VeriSafe Insulation-Piercing
Connection Kits
Insulation-Piercing Connectors for
VeriSafe AVT Sensor Lead Tapping on Copper Conductors
T-PMPI-322EN
Rev. 02 [10-2018]
INSTALLATION INSTRUCTIONS
Models: VS-CKP14-6, VS-CKP4-000
© Panduit Corp. 2018
PANDUIT VSC Series Insulation-Piercing Connectors are intended for use in simplifying
installation and connection of PANDUIT VeriSafe AVT Absence of Voltage Testers to phase
(run) conductors, per electrical code requirements, within the rated environmental and
operational limitations according to regulatory / safety standard certifications or listings.
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTALLATION INSTRUCTIONS
BEFORE ATTEMPTING TO INSTALL
NOTE: In the interest of higher quality and value, Panduit products are
continually being improved and updated. Consequently, pictures
may vary from the enclosed product.
NOTE: Updates to this Installation Instructions may be available. Check
for the latest version of this manual.
Email:
EU Website:
EU Email:
emeatoolservicecenter
@panduit.com
www.panduit.com
Panduit Corp.
USA Technical Support
Tel: 800-777-3300
Panduit
Europe • EMEA Service Center
Tel: +31 546 580 452 • Fax: +31 546 580 441