Panduit PN380 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 20

Panduit PN380 Скачать руководство пользователя страница 3

PANDUIT

DPoE Power System User’s Guide

Issue 1.0

Part Number: PN380

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by
Buyer. Buyer-supplied firmware or interfacing unauthorized Modification or misuse, operation outside of
the environmental specifications for the product, or improper site preparation or maintenance. No other
warranty is expressed or implied.

PANDUIT

Corp. specifically disclaims the implied warranties of

merchantability and fitness for a particular purpose.

The remedies provided herein are Buyer's sole and exclusive remedies.

PANDUIT

Corp. shall not be

liable for any direct, indirect, special, incidental or consequential damages, whether based on contract,
tort or other legal theory.

Unless otherwise specified by

PANDUIT

Corp., opening this product by unauthorized personnel will void

this warranty.

Trademarks

DPoE and Contour Crimp are trademarks of

PANDUIT

Corporation. All other trademarks are the property

of their respective owners.

ii

«
1
2
3
4
5
...
»

Содержание PN380





















Отзывы:

Нет отзывов