Panduit PanTher LS8EQ Скачать руководство пользователя

Страница: 62 / 71

APPLICATION BASED LABEL WIZARD (F4)

Using the TIA/EIA-606-A Compliance Tool in the Label Wizard

1. From within the Label Wizard, select TIA for TIA/EIA-606-A.
2. Use the right and left arrow keys to select the required class (class 1,

class 2, class 3, or class 4).

3. Press

ENTER.

4. Use the right and left arrow keys to scroll between TIA labeling

applications.

5. Press ENTER for the selected TIA application.
6. Use the right and left arrow keys to scroll within the parameters of each

TIA application.

7. Press ENTER for the selected parameter. An on-screen window will

appear.

8. Type the value for the selected parameter in the on-screen window.
9. Press

ENTER.

10. Repeat steps 6-9 for each parameter.
11. Press Shift and then F10 to save the serialization and exit the Label

Wizard.

12. The TIA compliant labels that you have created are stored in a data file.

The data tool appears on the home screen. To edit this file, highlight the
icon on the home screen, press SHIFT, and press the INSERT key.

13. Press F4 to restart the Label Wizard for a new TIA compliant labeling

application.

14. The TIA compliance tool in the LS8EQ printer is similar to the TIA/EIA-

606-A label wizard function within Easy-Mark™ labeling software.

Содержание PanTher LS8EQ








































































Результаты поиска

Содержание PanTher LS8EQ

Отзывы:

Похожие инструкции для PanTher LS8EQ

Бренды по названию

Популярные бренды

Panduit PanTher LS8EQ, Руководство оператора

Результаты поиска

Содержание PanTher LS8EQ

Отзывы:

Похожие инструкции для PanTher LS8EQ

Бренды по названию

Популярные бренды