For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010
FS012
Tak-Ty cables to fence
Insert Opticom QuickNet Pre-Terminated Fiber Optic
Cassettes into the enclosure as shown. Once
mounted, fully seat NyLatches to secure the
cassette.
Fully extend tray to ensure proper amount of slack is
used.
Cassette Installation Option
Figure 6A
Isometric view showing tray fully
extended and tilted down.
(cables omitted for clarity)
Opticom QuickNet Cassette Installation
Route fiber through grommet to fiber cassettes as
shown. Leave enough slack so when the drawer is
fully extended the cables are not put under tension.
DO NOT use so much slack that the drawer cannot
be returned to its home position (See Figure 6C).
Use Tak-Tys to secure fiber cords at cable entry
location and other points as shown.
Drawer in extended position.
(cover omitted for clarity)
Figure 6B
Free floating
Tak-Ty
Adhesive
Bevel Entry
Clips
Grommet
Fixed
Tak-Ty
Cable length
between point
“A” and point
“B” is approx.
31" [.787m]
“A”
“B”
Cassettes
(12 capacity)
Page 4 of 10
