© Panduit Corp. 2019
OPERATING INSTRUCTIONS
CTFP-25
ENGLISH
PA29442A01_02_ENG
Page: 3 of 8
3-2019
1.5 Sources of danger
The CTFP-25 must only be operated when the finger guard is screwed on. Only filtered compressed
air with a maximum pressure of 6 bar can be used.
Disconnect the machine from the compressed air before working on the CTFP-25, during breaks and
when the device is not in use. Do
not
pull on the compressed air tubing to disconnect.
1.6 Work places
The following should be avoided for operation and storage:
•
damp or dusty places,
•
places which are subject to high levels of heat, direct sunlight or low temperatures:
operating range: 59°F to 95°F (15 °C to 35 °C).
Protect the compressed air tubing from heat, oil and sharp edges.
1.7 Safety devices
The CTFP-25 has a finger guard at the front as a contact safety device.
Under no circumstances should this be removed.
The CTFP-25 is stopped when disconnected from the compressed air supply.
1.8 Permitted operators
Only authorized and instructed operators can work on the CTFP-25. The operator is responsible to
third parties in the working area.
The owner must:
•
make the operating instructions available to the operator and
•
make sure that the operator has read and understood the instructions
1.9 Guarantee
In principle, our "General terms of purchase and delivery" apply. These are available to the owner
when the contract is concluded at the latest.
Guarantee and liability claims resulting from damage to personnel or property are inadmissible if the
following points have been violated:
•
Non-designated use of the CTFP-25.
•
Inappropriate working places.
•
Inappropriate use and use which goes beyond that described in the operating instructions.
•
Unauthorized structural amendments to the CTFP-25.
•
Continued use of the CTFP-25 when a malfunction has been established.
•
Repairs carried out inappropriately.
!
Only use original spare parts
