Installation Guide
AT-VCC-IR3-KIT
8
15 Select the learn link. An information pop up will appear. Press OK.
16 Point the device’s IR remote at the IR learn window located halfway down the VCC and
press the button to be learned.
18
The command will appear in the Command Syntax field. Repeat the IR learn process until all
needed commands are learned.
19 Press the save changes button.
17 When the command is successfully learned, a pop up will appear with the learned IR
command.
a
Press
ACCEPT
to return to the commands.
b
If there is an IR Emitter connected, press
TEST IR
to broadcast the command to the
device to verify the command works. Press
ACCEPT
once done testing.
NOTE:
Use quick button presses to learn, do not hold the button down.
