Panduit Atlona AT-HDVS-150-TX-HDMI Скачать руководство пользователя страница 6

AT-HDVS-150-TX / AT-HDVS-150-TX-PSK

6

Important Safety Information

FCC Statement

FCC Compliance and Advisory Statement: This hardware device complies with 

Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) 

this device may not cause harmful interference, and 2) this device must accept any 

interference received including interference that may cause undesired operation. This 

equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a commercial installation. 

This equipment generates, uses, and can radiate radio frequency energy and, if not 

installed or used in accordance with the instructions, may cause harmful interference 

to radio communications. However there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 

measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the 

receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 

4) consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly 

approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where 

shielded interface cables have been provided with the product or specified additional components or accessories 

elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance 

with FCC regulations.

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use this product near water.

6.  Clean only with a dry cloth.

7.  Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8. 

Do not install or place this product near any heat 

sources such as radiators, heat registers, stoves, or 

other apparatus (including amplifiers) that produce 

heat.

9.  Do not defeat the safety purpose of a polarized 

or grounding-type plug. A polarized plug has two 

blades with one wider than the other. A grounding 

type plug has two blades and a third grounding 

prong. The wide blade or the third prong are 

provided for your safety. If the provided plug does 

not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

10.  Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from the 

product.

11. 

Only use attachments/accessories specified by 

Atlona.

12.  To reduce the risk of electric shock and/or damage 

to this product, never handle or touch this unit or 

power cord if your hands are wet or damp. Do not 

expose this product to rain or moisture.

13. 

Unplug this product during lightning storms or when 

unused for long periods of time.

14. 

Refer all servicing to qualified service personnel. 

Servicing is required when the product has been 

damaged in any way, such as power-supply cord or 

plug is damaged, liquid has been spilled or objects 

have fallen into the product, the product has been 

exposed to rain or moisture, does not operate 

normally, or has been dropped.

CAUTION: TO REDUCT THE RISK OF

ELECTRIC SHOCK

DO NOT OPEN ENCLOSURE OR EXPOSE

TO RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral triangle is intended to alert the user to 

the presence of important operating and maintenance instructions in the literature 

accompanying the product.

The information bubble is intended to alert the user to helpful or optional opera-

tional instructions in the literature accompanying the product.

Содержание Atlona AT-HDVS-150-TX-HDMI




























Отзывы: