AT-HDVS-150-TX / AT-HDVS-150-TX-PSK
12
When the unit is connected to a compatible receiver and display, pressing the
DISPLAY ON/OFF
button will send a
command to set the display power state. This is a programmable button and requires a compatible Atlona receiver.
Solution Setup and Configuration Guide
Toggling Power on the Display
AT-HDVS-150-TX
AT-HDVS-150-RX
HDBaseT IN
FW
DC 48V
+
HDMI OUT
AUDIO OUT
L
R
RX TX
RS-232
MENU
V
V
PW
LINK
1. Connect a category cable from the
HDBaseT OUT
port on the AT-HDVS-150-TX to the
HDBaseT IN
port on a
compatible receiver. In this example, the AT-HDVS-150-TX is connected to an AT-HDVS-150-RX.
2. Connect an HDMI cable from the
HDMI OUT
port on the receiver to a display.
3.
Press the DISPLAY ON/OFF button on the AT-HDVS-150-TX. The power state of the display, connected to the
receiver, will be toggled.
The following sections provide step-by-step instructions for the following topics:
• Toggling Power on the Display
• Selecting the Input
• Passing Analog Audio
• Input Auto Switching
• Display Control