4.2. Pairing your remote control with your Classic/Comfort Box
Your remote control uses radiofrequency technology so you don’t have to point it directly
at your Classic/Comfort Box. But first, you have to “pair” it with your Classic/Comfort Box.
To pair your remote control when you turn on your Classic/Comfort Box for the first time :
• Make sure you have prepared the remote control correctly
• Enter the code shown on screen using your remote control
• Confirm the code to complete the operation.
If you want to “re-pair” your remote control (if you’ve changed your remote control or
changed its batteries) :
Comfort Box
• Hold down the reset button (see picture op
-
posite) on the bottom of your Comfort Box for
4 seconds, until the LED on the front of the box
flashes twice. Release the button immediately.
The remote control pairing screen will display
• Follow the on-screen instructions
• Enter the pairing code shown on screen using
your remote control
• Confirm the code to complete the operation.
7
xxxxxxxx xxxxxx - xxxxx
UNDERSIDE VIEW
MAC address
serial number
Reset button
