background image

Doc id: ENG_OMM_SL400_SL450_P01

35/37

© Pandrol AB

© Pandrol AB
All Rights Reserved
No part of this publication may be reproduced or copied in any form or by any means 

without written permission from Pandrol AB.

11.1 Guarantee

All products delivered from Pandrol AB comes with a 12 month guarantee.  

The guarantee does not apply if the product defect or flaw in question exists because of 

or is a result of improper use, tampering, or unauthorized modification, or if the product 

has been exposed to fire, electrical storms or excessive voltage.

Warranty applies to consumable items and spare parts supplied by Pandrol AB.

11.2 Service

Service is offered after the expiration of the guarantee. Please contact Pandrol AB.

11.3 Disclaimer

Pandrol  AB  exempts  itself  from  liability  in  the  event  of  usage  that  deviates  from  that 

recommended in this manual.  

Insert a copy of the Declaration of Conformity in this section.

12. Contact

13. Declaration of Conformity

11. Warranty and service

Phone:

+46(0) 650 165 05

Web and e-mail

www.rosenqvistrail.com

[email protected]

Address:

Pandrol AB 

Hyggesvägen 4 

 

824 34 Hudiksvall 

SWEDEN

Содержание Rosenqvist SL400






































Отзывы: