| S0000473 | January 2022 rev6
© Pandrol 2022
5
sur
38
2. GENERAL SAFETY INSTRUCTIONS
The HFP is only intended to be used for the preheating of rail ends in the moulds prior to
welding with our Aluminothermic Welding Process.
• In the event of use other than that recommended, PANDROL declines all responsibility.
• Never use the HFP without first reading and understanding its instructions for use.
• The user must always work with material in good order.
• Never use the machine if you are tired or if you are taking substances, such as drugs, alcohol, which could impair
vision, dexterity or the ability to judge.
• The HFP user must comply with the regulations, procedures and site safety instructions in force.
• The HFP is a dangerous machine which must be operated by a single user; practical training should be given to
any new user.
• Use and maintenance must be carried out by qualified personnel.
• The operator must wear the necessary PPE for preheating operations: goggles, gaiters, overalls, gloves, etc.
• Handling and positioning of the HFP can be done by one person.
• The operator must ensure that his working area is clear (People, animals, electric cables, flammable substances,
etc.)
• The user should not make any changes to the design or configuration of the machine without consulting
PANDROL.
• The operator must have a stable position before starting to work.
• Ensure correct positioning of the HFP on its support when in use.
• Ensure that the propane cylinder is properly supported during use, keep it vertical, never lay the cylinder down
during use.
• Replace the protective cap of the propane cylinder valve before any handling, never handle the cylinder by its
valve directly.
