PANDROL CD200 IQ, Руководство по эксплуатации и обслуживанию

Страница: 66 / 82

(Hold ’ok’ to shutdown)
Ext. Ext. Man. Off Off
66 av 82
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
(5)
(6)
(7)
(1) (2) (3) (4)
9.3. De-clipping
Ì
WARNING!
Do avoid injury or damage, make sure
that the engine is turned off before any
adjustments are made.
Fig 98.
Fig 99. Tool set to EXTRACT MODE ZONE.
Boost function
If a clip is jammed due to i.e. rust, the boost function can
be used to gain extra power to the de-clipping function.
1. Set the machine to manual mode by pressing the
button (2) on the control panel.
2. Activate the boost-functionen by pressing the button
(4).
3. Press the button (6) to operate the de-clipping
function and release the jammed clip.
9.3.1. De-clipping
1. Make sure that all neccesary adjustments and
settings described in previous chapters are carried
out.
2. Set the machine to manual mode by pressing the
button (2) on the control panel.
3. Set the tool to de-clipping mode ”Ext.” by pressing
the button (1).
4. Position the workhead centered above the clips.
5. Pull the dead man’s grip to activate (7).
6. Press and hold the button (6) to operate the clipping
function. Press the button (5) to retract the clipping
arms.
7. Make sure that there are no damages to the insulator
or the e-clip.
8. Set the machine to auto mode by pressing the button
(2) on the control panel.
9. Transfer the machine to the next sleeper.Initiate a
clipping sequence by pressing the button (5). The de-
clipping arms will retract automatically.
Fig 100.