PA N D O R A T R A C E R
U S E R A N D I N S TA L L AT I O N MA N UA L
8
9
power supply and sends alarm notification to the owner.
·
Built-in battery charge
is an automatic function of the “Constant
connection” mode. It allows to charge the built-in battery while ignition
is on.
Autonomous beacon mode.
The additional mode designed to work
from the built-in battery when the main power supply is disconnected.
The device “wakes up” (switch on GSM/GNSS interfaces) for a short
time with a pre-set periodicity in order to inform the owner about its
location and state, send and receive SMS messages, connect to the
online services.
·
Activation period/Activation time
– a configurable functions of
the “Autonomous beacon” mode. They allow the tracker to “wake up” at
a specified time period or with a specified frequency. Configuration is
made by the owner via online services.
·
Accelerometer Trigger/Accelerometer Timeout
– a configurable
functions of the “Autonomous beacon” mode. They allow to “wake up”
the tracker by the external impact. Configuration is made by the owner
via online services.
·
Tracking mode/Duration of tracking mode operation
– a
configurable functions of the “Autonomous beacon” mode. They allow
to determine the tracker location with route tracking in online services.
Configuration is made by the owner via online services and/or SMS
messages.
w
arNiNg
! i
f
the
tracker
is
iN
the
«a
utoNomous
beacoN
»
mode
,
the
«t
rackiNg
»
fuNctioN
will
be
eNabled
after
the
Next
oNliNe
sessioN
of
the
tracker
.
Service mode
is an additional mode designed to disable the
programmable channel (engine preheater control, analogue input/
output) and alarm notifications during technical maintenance of the
vehicle.
Enabling/disabling of this mode is made by the user using the online
services by the «Switch on Service mode» and «Switch off Service
mode» commands. If radio tags or a mobile device are paired with
the tracker and the «Allow using phone as a tag» and/or «Allow use of
tags» functions are enabled, then the mode can be enabled only when
a radio tag or a mobile device is in the coverage zone of Bluetooth
connection of the tracker.
