PA N D O R A T R A C E R
U S E R A N D I N S TA L L AT I O N MA N UA L
26
27
• Engine blocking when ignition is ON and the radio tag is not in
coverage zone, disabling engine blocking when the radio tag is in
coverage zone;
• Automatic engine blocking on motion in absence of connection with
the tracker;
• Engine blocking on or without motion («Engine blocking on motion»
function);
• Automatic engine blocking by loss of connection with the tracker
(«Activating radio relay blocking before going into sleep mode»
function).
Pairing a module:
• Connect the wire 4 (Green) to the wire 5 (Black). Connect them to a
grounded spot of a car;
• Open mobile application NAV BT. Go to the “Peripheral devices” menu
and press the “ENTER PAIRING MODE” button;
• Connect the wire 7 (Red) to co12V;
• If pairing was successful, the radio module will be displayed in the App;
• Finish pairing by pressing the “EXIT PAIRING MODE” button;
• Disconnect the wire 4 (Green), insulate unused wires.
A
nt
enna 2.4GH
z
Input "Front Hood"
Not used
Not used
* The circuit must be protected by a fuse
(
+
/-)
15A*
3A*
PROGRAMMING
NC
– Blocking relay
Output (-/+12V) "Lock a hood lock"
Lock (-/+12V) "Unlock a hood lock"
Input (+12V) Power supply of a hood lock
GROUND (-)
COM
– Blocking relay
Blue/Red
Blue/Black
Green/White
Red
Red
Black
Green
Yellow
Blue/White
Blue
10
9
8
7
6
5
4
3
2
1
nom 10A
max 20A
}
+12V POWER SUPPLY
Connec
t
for pr
og
ramming
