27
26
U S E R MA N UA L
PA N D O R A S MA R T V3
You will create the data to sign in: LOGIN – your email, PASSWORD – a password entered during the
registration. You will receive an email with a confirmation link. Click the link to complete the registration
procedure.
Login
After completing of the registration process, youcan login to the online service via a computer’s web
browser or via the mobile app Pandora Connect. Use your previously created login/password to login.
Adding a system to your account
The created account can support up to 3 telemetry systems. Use the information from the «Owner’s
personal card» to add the system to your account.
Go to the «Add a device/Add a system» window and enter the LOGIN and PASS from the «Owner’s
personal card», create a name for your car and click «Add».
!
e
rase
The
proTecTive
layer
carefully
. d
o
noT
use
any
sharp
objecTs
To
avoid
damaging
of
hidden
informaTion
under
The
proTecTive
layer
.
a
fTer
This
,
you
will
be
able
To
conTrol
,
change
seTTing
and
geT
informaTion
abouT
The
vehicle
sTaTe
Through
The
online
-
service
.
!
n
umber
of
evenTs
in
The
hisTory
is
limiTed
. e
venTs
are
sTored
for
aT
leasT
one
monTh
.
Control via Bluetooth
The Pandora Connect application can work via a Bluetooth channel when there is no connection to
the server. This type of connection allows you to control the system, receive status information and use
your mobile phone as an authorization device.
To get access to these functions, pair a mobile device in the system:
I. ENTER THE PROGRAMMING MODE
Use the VALET button to enter the «Service PIN-code» (default value is 1-1-1-1). See the detailed
instruction of code entering in the «Control the system in case of emergency» section.
II. ENTER THE «PAIRING A MOBILE PHONE» PROGRAMMING LEVEL
After entering programming mode, press and hold the VALET button for 5 seconds (until the fifth
signal of the Siren/Beeper»). The system will enter the «Pairing a mobile phone» programming level. The
LED indicator will light green, the system is ready for pairing.
!
T
he
previously
paired
device
will
be
erased
from
The
sysTem
memory
afTer
enTering
The
level
.
III. PAIR A MOBILE PHONE.
Turn on Bluetooth on your mobile phone, open the settings of the application. Go to «Bluetooth control»,
tap «Not specified», select the detected system in the search window. The system will confirm pairing with
the series of green and red flashes of the LED an a sound signal of the siren.
!
i
f
There
is
no
auTomaTic
pairing
,
enable
The
«pin
requesT
for
phone
pairing
»
iTem
in
The
«r
adio
Tag
and
mobile
device
funcTions
»
seTTings
and
make
The
pairing
procedure
again
. a
mobile
device
will
requesT
a
pin-
code
(f
acTory
pre
-
seT
is
0-0-
1-1-1-1
where
4
lasT
digiTs
are
The
«s
ervice
pin-
code
».
IV. EXIT PROGRAMMING MODE
Turn on the ignition and then turn off to exit programming mode.
!
T
he
sysTem
supporTs
only
one
mobile
device
.