Pandora SMART MOTO V2, Руководство пользователя

Страница: 40 / 48

40
PA N D O R A S M A R T M O T O V 2
Enter the programming level №2:
• Enter the first digit of the code using the VALET button. Press the button the number of times equals
to the first digit. Pauses between presses should not exceed 1 second, every pressing will confirm
with an orange LED indicator flash. Pause for more than 1 second and a red LED indicator flash with a
sound from the Beeper confirms the input of the first digit. Then you can enter the next digit;
• Enter the other numbers in the same manner. The input of the fourth number will be confirmed by
the series of red and green LED indicator flashes and the series of sound signals of the Beeper. The
system will wait for PIN-code re-entering;
• Enter all four digits again.
- If you correctly enter the “Service PIN-code” twice, the indicator will produce the series of red and
green flashes and the Beeper will produce the series of sounds, the new PIN-code will be recorded, the
system will return to the programming level №0.
- In case of the incorrect code, input the indicator will be lit red and the Beeper will sound a long
beep, the system will not change the code and will return to the programming level №0.
Level №4 – Reset to the factory settings
The procedure recovers the factory settings of the system without deleting previously registered
devices (tags, mobile device, relays, etc.) that is stored in the non-volatile memory.
Enter the programming level №4:
• Press and hold the VALET button for more than 4 seconds. Release the button after a sound of the
Siren/Beeper. The system will confirm the resetting to the factory settings with a long red flash of the
LED indicator. After that, the system will reset the settings to default and return to the programming
level №0.
Level №11 – – Programming and configuring an “Immobilizer PIN-code”
The level is divided into 3 sublevels (Sublevel 11.0 – Selecting buttons; sublevel 11.1 entering
the PIN-code; sublevel 11.2 – confirmation of the PIN-code input). Use the VALET button to navigate
between sublevels and save the code.
Enter the programming level №11:
• №11.0 - Selecting buttons
The system will automatically enter the sublevel 11.0 (Selecting buttons) after entering the level
11. The system will wait for buttons pressing. Each pressing will be confirmed with an orange flash
of the LED. You can turn on the ignition (the system will stay in programming mode). The system can
determine buttons via analog “Code immobilizer 1” and “Code immobilizer 2” inputs .
After selecting active buttons, press the VALET button to enter the sublevel 11.1 (Entering the PIN-
code).