Pluto User Manual v1.38
Page 57 of 66
Appendix C: Light Illusion's LightSpace workflow and set up
The Pluto can be used as part of a closed loop monitor profiling set up, utilising
Light Illusion's LightSpace software suite. The Pluto will automatically generate
the patches as commanded by LightSpace and collect data from the Probe
simultaneously to build a profile.
To enable this functionality, open a Pluto software control app and click on the
Patches Tab.
Click in the
Listen to server
check box to allow the Pluto to communicate with
LightSpace for automatic patch generation. This will pop up a window for IP
details. Enter the IP address of the workstation running LightSpace.
Leave the Pluto Software open for the duration of the profiling process as
LightSpace communicates with the Pluto via this app.
Hint: For greater ease of use, run the Pluto Software on the same workstation as
the LightSpace
In LightSpace, open the Network settings and check the IP address of the
workstation running Pluto software is being displayed. Refer to LightSpace
manual for further information.
Note: that when Listen to server is selected, test pattern 16 will automatically be
selected to avoid confusion. It is possible to select
Disable Front panel
and
Disable Remote Access
during the profiling process as a way to ensure to there
is no external interference during this sometimes lengthy process. Remember to
Bypass all LUTS if required before starting the process.
Pandora Technology
United Kingdom
www.pandora-int.com
October 2013
