9
8
USER MANUAL
PANDORA DXL 0110L CAR SERVICE-SECURITY SYSTEM
Immobilizer mode
This mode is enabled by default. Use Pandora AlarmStudio application to
disable this mode. When switching on the ignition, base unit of Pandora
security system performs a search for immobilizer tags in radio zone.
If no radio tags were detected when the ignition is switched on, the
system will block the engine. Engine blocking will occur immediately or
when the car starts moving, it depends on block implementation and
system settings.
Anti-Hi-Jack-1 mode
This mode is disabled by default. Use Pandora AlarmStudio application to enable
this mode. Anti-Hi-Jack-1 mode helps to prevent aggressive seizure of the car
using delayed engine blocking on any door opening/closing. Every time on
opening/closing a door (when the ignition is switched on), immobilizer requests
response from a tag using unique algorithm. After a door was opened or closed
while the engine is running, if the system cannot detect a radio tag, the engine
will be stopped after 1 minute (general safety requirement for car movement).
«Engine blocking warning» ringtone will play from siren and beeper before
blocking. When warning signals end, the system will block the engine. Engine
blocking will occur immediately or when the car starts moving, it depends on
block implementation and system settings.
Anti-Hi-Jack-2 mode
This mode is disabled by default. Use Pandora AlarmStudio application to
enable this mode. Anti-Hi-Jack-2mode helps to prevent aggressive seizure
of the car using delayed engine blocking on radio tag disappearance. Every
time when switching on the ignition, immobilizer requests response from
a tag using unique algorithm. When the engine is running, if the system
cannot detect a radio tag, the engine will be stopped after 1 minute (general
safety requirement for car movement). «Engine blocking warning» ringtone
will play from siren and beeper before blocking. When warning signals end,
the system will block the engine. Engine blocking will occur immediately
or when the car starts moving, it depends on block implementation and
system settings.
You can enable and disable this function using Pandora AlarmStudio
application.
PANDORA BT (ANDROID) application
Pandora BT application is an additional tool for controlling and managing
the system state. The system can connect only to the mobile device that was
previously registered in the system memory. Registration is performed via
encrypted 2.4 GHz channel with the Bluetooth Low Energy protocol support.
Pandora BT is available on Google Play for devices with Android 4.4 or higher
and with Bluetooth 4.0 Low Energy or higher module.
Installing the application
You can download free Pandora BT application from application store (Google
Play). After installing the application, perform the mobile device registration
procedure (see p. 26 «Registration and deleting a mobile device»).
The application usage
The system should be in the Bluetooth radio coverage zone. Start Pandora BT, the
application will automatically find the system and make a connection; after that the
main menu of the application will open.
The main menu «Control» displays the current status of the system and allows
you to control the system using multifunction buttons. Control buttons is used for
controlling the car and quick access to the system functions. The functions can be
switched on or off or the car can be remotely controlled by pressing and holding
until the progress bar will fully loaded (3 seconds), this is done to protect against
accidental button press. You can change button location and select the desired
functional in the «Control buttons» settings.
WARNING!
ENABLE BLUETOOTH FUNCTION ON YOUR MOBILE DEVICE
TO USE PANDORA BT APPLICATION
