Pandora DXL 0110L Скачать руководство пользователя страница 15

29

28

USER MANUAL

PANDORA DXL 0110L CAR SERVICE-SECURITY SYSTEM

ADDITIONAL DEVICES

Blocking radio relay

For Pandora DXL 0110L optionally blocking BTR-101 radio relay is available. 

Blocking radio relay with built-in accelerometer should be placed in the engine 

compartment. Herewith zone of built-in aerial 2,4 GHz should not be shielded. 

Provide a rigid fastening to the car body or to the fixed wirings. It is forbidden 

to hide the module in wiring. To save energy, radio relay power is connected 

to the ignition. Radio relay is normally closed and has a full set of contacts. 

Blocking is carried out on unauthorized movement.

Programming of radio relay is performed on level 6 or 7.

•  Select desired level of the programming menu 6, 7 to program radio relay 

№1, №2 respectively.

•  Connect wire 1 of radio relay to the grounding spot. 

•  Apply power (12V) to the contacts 3 and 4 of radio relay. The siren/Beeper 

will confirm recording of radio relay to the system’s memory with 1 beep. 

Shortly press 

VALET

 button to save settings.

•  After successful recording of radio relay switch off and insulate contact 

3, connect contact 4 to the constant power 12V or to any wire, which has 

constant voltage of 12V when engine is running.

WARNING!

DO NOT PLACE RADIO RELAYS DIRECTLY ON ENGINE!

Useful online resources

www.pandorainfo.com

 

Official web-site of Pandora.

[email protected]

Customer support email.

Warranty obligations

Manufacturer guarantees correct operation of the service-security system 

if exploitation, installation, storage and transportation conditions described in 

this manual were met.

The system should only be used according to installation scheme and 

user manuals. The system is meant to be installed by the professional car 

electronics installers. We recognize that outside Russia the system can be 

installed by amateurs – those installations are still a subject of limited warranty. 

The installer should fill in installation certificate that is included in this manual. 

Parts malfunctioning during warranty period on the fault of the 

manufacturer should be repaired or replaced by the installation center of the 

manufacturer or by certified service center. List of certified service centers 

outside Russia can be found on pandorainfo.com

The user loses the right for warranty services in the following cases:

•  when warranty period expires;

2

5

1

4

3

NO

NC 

COM 

programming

6

Antenna 2,4 Ghz

+12V

Radio tag BT-760

Engine compartment 

module RHM-03BT

Содержание DXL 0110L


















Отзывы: