Pando PI-DOM, Руководство по установке, Страница: 92 / 101

16
INOXPAN S.L.
EN
WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone does not start:
• The hob is badly connected to the electrical network.
• The safety fuse is cut off.
•
The lock function is activated.
•
The sensitive touch keys are covered with grease or water.
• An object is put on a sensitive touch key.
The control panel displays [ U ]:
• There is no pan on the cooking zone.
•
The pan is not compatible with induction.
•
The pan’s bottom diameter is too small.
The control panel displays [ E ]:
•
The electronic system is defective.
•
Disconnect and reconnect the hob.
• Call after sales service.
One or all cooking zone(s) are cut off:
• The safety system functioned.
•
This system works when you forgot to switch off the cooking zone.
•
One or more sensitive touch keys are covered.
•
The pan is empty and its bottom overheated.
•
The hob also has an automatic reduction of the power level, and is switched off
automatically when there is a possibility of overheating.
The ventilation system is still working after switching off the hob:
•
This is not a failure, the fan continues to protect the electronic device.
• The fan stops automatically.
The automatic cooking system does not start:
• The cooking zone is still hot [ H ].
• The highest Booster level is set [ 9 ].
The control panel displays [ U ]:
•
See chapter “Keep warm“.
The control panel displays [ II ]:
•
See chapter “Stop&Go“.
The control panel displays [ ] or [ Er03 ] :
•
An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ E2 ] :
• The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E8 ] :
•
The air inlet of the ventilator is obstructed, release it.
The control panel displays [ U400 ] :
•
The hob is not connected to the network. Check the connection and reconnect the hob.
The control panel displays [ Er47 ] :
•
The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the after sales service.