Pando E-390, Руководство по установке

Страница: 156 / 180

Recall Function
After switching off the hob ( ), it is possible to recall the last settings.
•
cooking stages of all cooking zones (Booster)
•
minutes and seconds of programmed cooking zone-related timers
•
Keep warm function
•
Automatic cooking
The recall procedure is following:
•
Press the key [ ] for 2 sec.
•
Then press [ II ] before the light stops blinking.
The previous settings are again active.
“Keep warm” Function
This function allows the reach and automatically maintains at the temperature of 70°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
•
To engage, to start the function « Keep warm »:
Action Control panel Display
Activate the Keep warm Press on key [ ] [
U
]
To stop Press on key [ ] [ 0 ]
The maximum duration of keeping warm is 2 hours.
Bridge or Automatic Bridge Function
This function allows the use of 2 cooking zones at the same time with the same features as a
single cooking zone. With this function the Booster function is allowed on the left and center
zones.
Action Control panel Display
Activate the hob Press key [ ] for 2 sec. [ 0 ]
Activate the bridge Place a pan on one of the two zones
that will be bridged and press
simultaneously the corresponding
selection keys
[ 0 ] and [ ]
or
Automatically: put a great pan on the
[ ] blink
2 zones and press on the 2 “SLIDER” [ ]
Increase bridge
Slide on the “SLIDER“
witch indicates the power [ 1 ] to [ 9 ]
Stop the bridge Press simultaneously
of the 2 cooking zones
[ 0 ]
40
EN